home  | site map
 


 

Product Description

 

Renew-Crete® Re-Coat is co-polymer modified resurfacing compound that renews old and stained concrete surface to look as good as newly cured concrete. This system adds a thin layer of cementitious coating on old, stained or worn-off concrete surfaces, which is advantageous since it does not affect the finish level. As a result, old concrete need not be demolished and replaced in order to renew its appearance!

 

Re-coat is a simpler, more cost-effective choice than breaking up and replacing an existing slab. Textures can be applied by using broom or trowel finishes to increase the skid resistance. Renew-Crete® Re-Coat comes in a variety of different colors for added aesthetic appeal.

 

This innovative, simple yet effective solution to renewing old concrete has been used in numerous pedestrian footpaths and car parks, in public places as well as private luxurious condominiums.

 

 

Advantages

 

  • Fast application with minimum hassle.
  •  

  • Faster completion time.
  •  

  • Avoid the need to break off existing surface.
  •  

  • Reduce noise and air pollution.
  •  

  • Reduce waste from broken concrete wastes.
  •  

  • Superior skid resistance.
  •  

  • Higher strength and durability than normal concrete.
  •  

  • Adds only 1-2 mm thickness to the surface.
  •  

  • No reliance on concrete supply (scarcity of sand and granite).

 

 

Installation Method

 

Renew-Crete® Re-Coat is installed quickly with little hassle and minimum closure period. To ensure superior bonding, the old surface is thoroughly cleaned and pressure-washed to remove any impurities or chemicals. Cracks and defects on the old concrete surface are repaired before a thin layer of Re-Coat is applied over the surface. If broom finish is desired, the material is allowed to dry slightly before applying the broom finish. The dried surface is finally coated with Renew-Crete® Sealer to form a protective layer.

copyright renew-crete singapore 2007. All rights reserved